<p>100% brand and high quality</p> <p>Two SSDs can be inserted at the same time, only one SSD can be recognized at a time, and the switch needs to be toggled to the corresponding position</p> <p>NGFF part of this adapter card is only suitable for B-key or B\/M-key interface, not for M-key interface. Use of hard drives that do not support AHCI and NVME protocols</p> <p>Switch toggle design, the NGFF mode switch is toggled up, the MSATA mode switch is toggled down</p> <p>Size:10x7cm</p> <p>Only m2 hard drives that support SATA protocol (NGFF) are used:</p> <p>1. Convert the SSD solid state drive that supports M.2 NGFF or MSATA to SATA2.5 inch \/3.5 inch hard drive for use</p> <p>2. Fully compatible with SATA3.1 standard</p> <p>3. Compatible with PCI Express M.2 protocol</p> <p>4. NGFF and MSATA SSD allow input voltage of 3.3V and maximum current of 3A. This adapter card has no chip, so there is no such thing as a speed. It only serves as a transfer function. The speed is related to the SSD itself.</p> <p>5. Support M.2 NGFF SSD of 80mm 60mm 42mm 30mm</p> <p>6. Support full-height and half-height size MSATA SSD</p> <p>Colour:black</p> <p>Material:plastic</p> <p>Package Contents:</p> <p>1 * Hard Disk Adapter Board</p> <p>1 * screwdriver</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>