Characteristic: 1. The product can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N and P channel MOSFETs, IGBT, JFET, triacs and batteries. 2. The tester can be used to detect infrared waveforms and Zener diodes 3. Thanks to the self-calibration function, when detected, set the infrared remote control in relation to the “IR” light, and then press the button on the remote control. If the detector successfully decodes, it will display the data code and infrared waveform 4. Simple operation, one key to operate, automatic detection and shutdown, you can also press the multifunction button to close the detector 5. Place the element pin in the appropriate area, then switch the small handle, the detector will automatically test, and the result will be clearly displayed on the backlit TFT screen 6. Unlike a regular black and white display, this detector will display the result in color . . TRANSISTOR TESTER NPN PNP LCR-TC1 DIGITAL Specification: Item Type: Transistor Tester Material: plastic Display: 1.8 inch TFT screen Diode Range: Zener Diode: Transistor Detection Area: 0.01 – 4.5 V Zener diode detection area: 0.01 – 30 V Triac Switch Range: IGT Capacity: 25pF-100mF Resistance: 0.01-50MΩ Inductance: 0.01 mH-20 H Battery: 0.1-4.5V Power Mode: Rechargeable Lithium Battery . TRANSISTOR TESTER NPN PNP LCR-TC1 DIGITAL List of packages: 1 x Tester 3 x Connection Cable 1 x LED light 1 x Capacity 1 x 3-pin 1 x Charging Cable . TRANSISTOR TESTER NPN PNP LCR-TC1 DIGITAL Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.