1、High quality all metal gears can make sure the durability and stability of the product 2、Adopt pure copper coil, the deceleration resistance and conductivity are strengthened, so that the motor torsion is increased 3、The brushless motor has overload current protection which can protect it to avoid burning out during the use of the motor and increase the service life of the motor 4、The motor has small size and large torsion, which can provide stable performance during operation 5、Suitable for various industries such as micro machinery, various CNC machine tools, high-accuracy measuring instruments, electronic manufacturing equipment and financial machinery Item Type: Brushless Motor Model: XD-37GB3525 Material: Copper Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20MΩ Temperature Rise: It is normal that the temperature rise of the coil is measured by the resistance method when the gear box or equivalent heat sink is installed and the rated operation is performed under normal temperature and humidity. Insulation Class: Class B(130℃) Operating Environment Temperature: Motor: -10~+40℃ (no icing) Use Environment Humidity: 85% or less (no condensation) CW/CCW: Yes Speed Adjusted: Yes Speed Control Board: DC6-30V Model Voltage(DC/V) No-Load Speed(rpm/min) No-Load Current(A) Load Speed(rpm/min) Load Current(A) Power(W) XD-37GB3525 12V 100 0.16 93 0.65 10 200 0.16 175 0.65 10 300 0.16 245 0.65 10 500 0.16 435 0.65 10 600 0.16 535 0.65 10 Notes: 1 Overload and Locked Rotor: When the motor is running, it generates heat due to the energy conversion that occurs inside the coil and the iron core, and the temperature gradually rises. The load is within the rated range, and the heat generation and heat dissipation are balanced, and the coil of the motor will not be burnt. However, it will cause heat under overload and locked-rotor conditions. When the running time is too long, the insulating film on the enameled wire of the coil is dissolved, causing a short circuit between the enameled wires and burning the motor. 2 When Running at Low Speed: For DC motors, carbon brushes are generally used. The rotating commutator rubs against the carbon brushes, creating sparks at the notches of the commutator. When the motor is running at a low speed, the carbon brush powder that is easily generated by the friction between the commutator and the carbon brush will accumulate in the commutator slot, causing a short circuit and burning the motor and driver. Please be very careful. 3 Precautions on the PWM Controller: In the PWM control state, when using the built-in motor of the electrolytic capacitor, the motor may not rotate at a certain fixed frequency. Please try to use varistor to hide the motor. (Need to do related tests) 4 Regarding Inertia and Braking: After the motor is powered off, the rotor will still rotate due to inertia, which is the inertia of the DC motor. If you want to stop the rotation immediately, you can short-circuit the positive and negative terminals after turning off the power. The use of this kind of brake is to use the motor to generate electricity (reverse current). The current may increase temporarily and shorten the life. 5 Treatment of Floor Motor: Because the magnetic tile is a brittle material, the DC motor may break the magnetic tile once it falls, causing the motor to block and cause burns. Please do not use the motor after it has landed at a high altitude. 1 x Motor 1 x Bracket 10 x Screw 1 x Speed Control Board