Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating on/off status Voltage Range: +/-10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Medium Temperature: 90C Ambient Temperature Range: -40C to 60C Maximum Current Consumption: 4 mA Supply Voltage: 24240V AC/DC, 50/60 Hz Discharge Time (ON): 0.510 seconds Time Interval (OFF): 0.545 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components Clean the compressed air system before installation Observe correct valve installation direction: outlet must not be blocked or impacted by hoses Ensure supply voltage matches drain valve voltage rating; when using DC, connect positive pole to terminal "1" Drain valve is pre-wired at factory: brown wire = live (L), blue wire = neutral (N), yellow-green wire = safety ground (GND) Tighten the screws on the terminal box securely to prevent water ingress Warning: Before installing the electronic drain valve, ensure: Compressed air system is fully depressurized Power supply is disconnected Color: Gold + Black Material: Metal Size: Aperture: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Other items shown are not included Note: Lighting and display settings may cause slight color variation between image and actual item Measurement error allowance: 13 cm